17
6
DSC OPERATION
■ Transmitting DSC calls
Transmitting individual call
The individual call function allows you to transmit a DSC sig-
nal to a specific party only.
q Select a desired channel other than channel 70.
w Push [DSC/ENT] to select the DSC menu.
e Rotate the channel selector to select “individual” and push
[DSC/ENT].
r Rotate the channel selector to select the desired pre-pro-
grammed individual address; or push [DSC/ENT] while
“Manual set” is displayed, to set the ID code for the indi-
vidual you wish to call.
•The ID code for the individual call can be set in advance. (p. 22)
t Push [DSC/ENT] to transmit the individual call.
•Channel 70 is selected and the individual call is transmitted to
the selected station.
•If channel 70 is busy, the transceiver standbys until the channel
becomes clear.
•Routine category only is available.
y Standby on channel 70 until an acknowledgement is re-
ceived.
u When the acknowledgement is received, the display
changes to the previously selected user channel with
beeps.
i Push and hold [PTT] to communicate your message to the
responding party.
To Next Page
Loading...
Need help?
General
