•
Blade and cutting stick replacement
•
IDEAL 4810-95 • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP
If the cutting quality decreases:
•
Check the cutting depth (see page 38).
•
Check the cutting stick (see page 34).
•
Replace or grind the blade (see page
30 - 38).
The blade cannot be ground if the blade
height is less than 83 mm/3,29 inches.
A new blade must be used.
The blade may only be ground by a qualified
supplier or from the manufacturer
Krug & Priester, D-72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not
extract or transport the blade without
protection. Changing the blade may only be
performed by trained staff.
- 30 -
To Next Page
Loading...
Need help?
General
