IDEAL COMBI ESP 24 User Manual

DISPLAY CODE ON THE BOILER DESCRIPTION ACTION
Outside sensor
failure
Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
Low mains voltage Contact a qualified electrician or your electricity provider.
Unconfigured PCB Unconfigured PCB. Please contact Ideal (if under warranty) or
alternatively a Gas Safe Registered Engineer if outside of the
warranty period. In IE contact a Registered Gas Installer (RGII).
Boiler resets in
15 minutes
1. Turn power off and on at the fused spur.
2. If the boiler fails to operate please contact Ideal (if under
warranty) or alternatively a Gas Safe Registered Engineer if outside
of the warranty period. In IE contact a Registered Gas Installer RGII).
False flame lockout Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
DISPLAY CODE
ON THE BOILER
DESCRIPTION
The boiler is in standby mode awaiting either a central heating call or hot water
demand.
The boiler has a call for central heating but the appliance has reached the desired
temperature set on the boiler.
The boiler has a call for hot water but the appliance has reached the desired
temperature set on the boiler.
The boiler is operating in central heating mode.
The boiler is operating in hot water mode.
The boiler is operating in frost mode.
FAULT CODES.
OPERATIONS MODE.
12

IDEAL COMBI ESP 24 Specifications

General

Brand	IDEAL
Model	COMBI ESP 24
Category	Boiler
Language	English