IDEAL INSTINCT 40 User Manual

4
User’s
2 USER INTERFACE - BASIC OPERATING INSTRUCTIONS
Ideal Evomax 80kW
Normal Operation
Set Flow Temp’
Set DHW Temp’
SETTING FLOW TEMPERATURE
Ideal Evomax 80kW
Normal Operation
Set Flow Temp’
Set DHW Temp’
Set Off/Sum/Win
Rotate the KNOB clockwise until a screen similar to the following
is displayed
Set Flow Temp’
80°C
Press SELECT and a screen similar to the following will be displayed
Press + and - to change to the required setting and then press
ENTER to store
Rotate the KNOB anti-clockwise until Normal Operation is
highlighted again and press SELECT to return to normal operation
Press SELECT and a screen similar to the following will be displayed
The kW output number in the 1st line will vary depending the
maximum output of the boiler
Ideal Evomax 80kW
Normal Operation
Set Flow Temp’
Set DHW Temp’
Press SELECT and a screen similar to the following will be displayed
The kW output number in the 1st line will vary depending the
maximum output of the boiler
Ideal Evomax 80kW
Set DHW Temp’
Set Off/Sum/Win
Out’ Sensor Slope
Normal Operation
Rotate KNOB clockwise until a screen similar to following is displayed
Set Off/Sum/Win
Standby
Summer
Winter
Press - for more
Press SELECT and a screen similar to the following will be displayed
Press + and - to change to required setting, press ENTER to store
Rotate the KNOB anti-clockwise until Normal Operation is highlighted
again and press SELECT to return to normal operation
SETTING SUMMER, WINTER AND STANDBY OPERATION
Note that Standby Mode will disable Domestic Hot Water and
Central Heating, Summer Mode will disable Central Heating

IDEAL INSTINCT 40 Specifications

General

Brand	IDEAL
Model	INSTINCT 40
Category	Boiler
Language	English