iDevices IGRILL MINI User Manual

9
Temperatures below -22°F or above 572°F (-30ºC or above
300ºC) will not display in the iDevices Connected app and
will cause the probe to disappear from connection.
Probe Wrap Use
To wrap your probe:
• Hold the probe wrap so that the clip segment is on the bottom left
and the iDevices logo is legible in the center of the probe wrap.
• Snap the probe into the probe wrap’s clip, ensuring that the probe’s
body follows the contour of the probe wrap and leaves a ½ inch gap
between the probe and the wire channel of the probe wrap. The tip
of the probe should be pointed downward.
• Wrap your probe’s wire clockwise around the probe wrap.
• When you reach the adapter end of the probe wire, it can be
inserted into the probe wrap’s wire channel to secure the wrapping.
Using the iGrill
mini
Smart LED
The Smart LED allows the iGrill
mini
to display the connected probe
temperature reading through the use of color. Below is a list of all of the
light combinations you will see on the Smart LED and their associated
meanings:
Connection
• Solid White: Powering off or reset complete.
• Solid Blue: Conrms pairing of new device.
• Blinking Blue: Awaiting pairing or no alarm set.

iDevices IGRILL MINI Specifications

General

Brand	iDevices
Model	IGRILL MINI
Category	Thermometer
Language	English