Setting and starting a programme
The Auto Off function
This function decreases energy consumption by automatically deactivating the appliance when it is not operating.
The function comes into operation:
15 minutes after the completion of the programme.
After 15 minutes if the programme has not started.
Starting a programme
Caution! Do not remove the baskets from the dishwasher before a wash cycle.
1. Keep the appliance door ajar.
2. Press the on/off button to activate the appliance.
3. To select a desired programme, press the related programme button. The related programme indicator is on.
The display shows the programme duration.
4. Set the applicable options.
5. Close the appliance door to start the programme.
Starting a programme with delay start
1. Set a programme.
2. Press repeatedly until the display shows the delay time you want to set (from 1 to 24 hours). The delay indicator
comes on.
3. Close the appliance door to start the countdown.
While a countdown is running it is possible to increase the delay time but not to change the selection of the
programme and options.
When the countdown is completed, the programme starts.
To Next Page
Loading...
Need help?
General
