Permitted use
Risk of injury, burns, electric shock, re,
explosion or damage to the appliance.
This appliance is for cooking purposes
only. It must not be used for other purposes,
for example room heating.
Remove all the packaging, labelling and
protective lm (if applicable) before rst use.
Make sure that the ventilation openings
are not blocked.
Do not operate the appliance with wet
hands or when it has contact with water.
When you place food into hot oil, it may
splash. Fats and oil, when heated, can
release ammable vapours. Keep ames or
heated objects away from fats and oils when
you cook with them. The vapours that very
hot oil releases can cause spontaneous
combustion. Used oil, that can contain food
remnants, can cause re at a lower
temperature than oil used for the rst time.
Do not activate the cooking zones with
empty cookware or without cookware. Do
not keep hot cookware on the control panel.
Do not put a hot pan cover on the glass
surface of the hob. Do not let cookware boil
dry. Do not use aluminum foil or other
materials between the cooking surface and
the cookware, unless otherwise specied by
the manufacturer of this appliance.
Cookware made of cast iron or with a
damaged bottom can cause scratches on the
glass / glass ceramic. Always lift these
objects up when you have to move them on
the cooking surface. Be careful not to let
objects or cookware fall on the appliance.
The surface can be damaged. Use only
accessories recommended for this appliance
by the manufacturer.
Clean the appliance regularly to prevent
the deterioration of the surface material.
Deactivate the appliance and let it cool down
before cleaning. Clean the appliance with a
moist soft cloth. Use only neutral detergents.
Do not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the appliance
operates.
Installation
The appliance must be handled and
installed by two or more persons - risk of
injury. Always use safety gloves and
enclosed footwear - risk of cuts.
Installation, electrical connections,
service and repairs must be carried out by
the authorised installer. Follow the assembly
instructions supplied with the appliance.
Remove all the packaging. Make sure that
the appliance has not been damaged during
transport. In the event of problems, contact
the dealer or your nearest Authorised
Service Centre. Do not install or use a
damaged appliance.
Install the appliance in a safe and
suitable place that meets installation
requirements. Do not use the appliance
before installing it in the built-in structure.
Keep the minimum distance from other
appliances and units. The appliance must be
disconnected from the power supply before
any installation operation - risk of electric
shock. During installation, make sure the
appliance does not damage the power cable
- risk of re or electric shock. Only activate
the appliance when the installation has been
completed.
Carry out all cabinet cutting works before
tting the appliance in the furniture and
ENGLISH 6
To download the full version visit www.ikea.com
To Next Page
General
