13
Connecting an IBM-Compatible Desktop Computer
1 Locate the cable that connects your monitor to your computer.
Unplug it from the computer.
2 Plug the end of the CableWizard computer cable into the
monitor connector on your computer.
3 Plug the end of the computer cable into the connector
on the CableWizard.
F
IGURE
12
Connecting the CableWizard computer cable to an IBM-compatible desktop computer
Do you want to display the image on your computer’s monitor as
well as on the projection screen?
1 Plug your monitor’s cable into the connector on the
CableWizard.
Do you want to play your computer’s audio on the projector?
1 Unplug the audio cable, if present, from your computer.
2 Plug either end of the CableWizard audio cable into the audio
connector on your computer.
3 Plug the other end of the audio cable into the connector
on the CableWizard.
computer cable
Downloaded From projector-manual.com Boxlight Manuals
To Next Page
Loading...
Need help?
General
