15
Connecting an Apple PowerBook Computer
1 Plug the end of the CableWizard computer cable into the
video connector on your PowerBook.
NOTE: Some PowerBooks
require the Apple-supplied video-
out cable for external video. Con-
nect it between the PowerBook
and the CableWizard computer
cable as shown in Figure 14.
2 Plug the end of the CableWizard computer cable into the
connector on the CableWizard.
3 If you want the projector display to be the same as the Power-
Book’s screen display, turn on video mirroring. (See “Using
Video Mirroring with a PowerBook Computer” on page 59 for
additional information.)
F
IGURE
14
Connecting the CableWizard computer cable to an Apple PowerBook
Do you want to play your computer’s audio on the projector?
1 Plug either end of the CableWizard audio cable into the audio
connector on your PowerBook.
2 Plug the other end of the audio cable into the connector
on the CableWizard.
computer cable
PowerBook
video-out cable
Downloaded From projector-manual.com Boxlight Manuals
To Next Page
Loading...
Need help?
General
