4
USER INSTRUCTIONS
Identify the problem that is being experienced with the controller or compressor.
Locate the problem in the table of contents under the PROBLEMS section.
Turn to that page and follow the flow chart through the diagnostics. If the flow
chart refers to another paragraph, find the paragraph number in the table of
contents and turn to that page. Then follow any procedures within that section.
EXAMPLE:
Compressor is experiencing CHECK INLET CONTROL SYS alarm.
Find CHECK INLET CONTROL SYS in the table of contents under the problems
section. That refers to page 11. As you follow the diagnostics, the flow chart
says to see paragraph 2.3. Find paragraph 2.3 in the table of contents. That
refers to page 36 for background and procedure information. Turn to that page
and follow any instructions.
To Next Page
Loading...
Need help?
General
