MD021 Plastic Wire Drawing Machine User Manual
Display the bus voltage
when the latest fault
occurs.
Group F3: Communication Parameters
For details, see "Modbus Serial Communication Protocol for the
Plastic Wire Drawing Machine."
Group F4: User Password and Parameter Copy
Unauthorized personnel are not allowed to view and modify this
parameter.
If this parameter is set to any non-zero number, the password
protection function is enabled. If you do not need a password, set this
parameter to 00000.
After a password is set, enter the correct password when you want to
set parameters. If the entered password is incorrect, you cannot query
or modify parameters, and you can only view the running and stop
display parameters.
Remember the password that you set. If you forget the password,
contact the vendor.
To Next Page
Loading...
Need help?
General