5
Insignia 19"/22" LED TV
www.insigniaproducts.com
3 Attach the wall-mount bracket to your TV using
the mounting holes on the back of your TV. See
the instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
TV components
Package contents
• Remote control and batteries (2 AAA)
• Stand with screws (4)
• Quick Setup Guide
• Important Information
TV front and side controls
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take
type M4 screws.
3.94 in. (100 mm)
3.94 in. (100 mm)
Wall-mount brackets
# Item Description
Remote control sensor Receives signals from the remote control. Do not block.
Power indicator
Lights red when your TV is in standby mode. For more
information, see “Turning your TV on or off” on
page 22.
MENU
Press to open the on-screen menu. For more
information, see “Navigating the menus” on page 23.
INPUT
Press to open the INPUT SOURCE list, press CH or
CH to select a video input source, then press
VOL+ or VOL–. For more information, see “Selecting
the video input source” on page 22.
VOL+/VOL– Press to increase or decrease the volume.
CH /CH
Press to go to the next or previous channel in the
channel list. For more information, see “Selecting a
channel” on page 23.
(power)
Press to turn your TV on or off (standby mode). When
your TV is off, power still flows through it. To
completely disconnect power, unplug the power cord.
VOL
MENU
INPUT
CH
1
2
3
4
5
6
7
NS-19E320A13_NS-22E340A13_11-1256_MAN_V1_ENG.book Page 5 Thursday, February 9, 2012 3:19 PM
To Next Page
Loading...
Need help?
General