Insignia NS-24E40SNA14 User Manual

48
NS-24E40SNA14 Insignia 24" LED TV
www.insigniaproducts.com
Checking the digital signal strength
You can check the digital signal strength to
determine if you need to adjust your antenna or
digital cable input. The higher the signal strength,
the less likely you are to experience picture
degradation.
To check the digital signal strength:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight CHANNELS, then press
T or ENTER. The CHANNELS menu opens.
3 Press
S or T to highlight Channel Strength,
then press ENTER. The Channel Strength screen
opens showing the signal strength meter.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Automatically adjusting the aspect ratio
Auto Aspect Ratio automatically changes how the
picture looks on the screen (aspect ratio) based on
the TV program you are viewing.
To automatically adjust the aspect ratio:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight CHANNELS, then press
T or ENTER. The CHANNELS menu opens.
3 Press
S or T to highlight Auto Aspect Ratio,
then press ENTER.
4 Press
S or T to select On (automatically adjust
the aspect ratio) or Off (does not automatically
adjust the aspect ratio), then press ENTER.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Insignia NS-24E40SNA14 Specifications

General

Brand	Insignia
Model	NS-24E40SNA14
Category	TV
Language	English