Insignia NS-28D220NA16 User Manual

28
28" 720p 60Hz, LED TV
www.insigniaproducts.com
Connecting external speakers or a sound bar
You can connect external speakers using:
• Digital audio
• Analog audio
Digital audio
1 Make sure that your TV’s power adapter is unplugged and the digital speaker system or sound bar is turned off.
2 Connect a digital coaxial audio cable (not provided) to the DIGITAL OUTPUT (Coaxial) jack on the side of your TV
and to the coaxial AUDIO IN jack on the digital speaker system or sound bar.
3 Plug your TV’s power adapter into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 On your TV’s Audio menu, highlight Digital Audio Format/Audio Delay, then press ENTER or
. Set the Audio
Format option to PCM. See the Digital Audio Format/Audio Delay option in Adjusting sound settings on page 47.
On your TV
Digital speaker system
Sound bar
Side of TV
Digital coaxial
cable
connector
Digital coaxial
audio jack
Digital coaxial
cable
NS-28D220NA16_14-1311_MAN_V1_ENG.book Page 28 Friday, April 24, 2015 9:15 AM

Insignia NS-28D220NA16 Specifications

General

Brand	Insignia
Model	NS-28D220NA16
Category	TV
Language	English