5
Insignia 32" 720p LED TV
www.insigniaproducts.com
3 Secure the stand cover to the back of the TV
screen using the three screws you just removed.
4 Attach the wall-mount bracket to your TV using
the mounting holes on the back of your TV. See
the instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
TV components
Package contents
• Remote control and batteries (2 AAA)
• Stand base and screws (4)
•Stand cover
•Power cord
• Quick Setup Guide
• Important Information
Front
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take
type M6 screws.
7.84 in. (200 mm)
3.92 in. (100 mm)
Wall-mount brackets
# Item Description
Power indicator
Turns off when your TV is on.
Lights red when your TV is off (standby mode).
Remote control sensor
Received signals from the remote control. Do not
block.
MENU
Press to open the on-screen menu. For more
information, see “Navigating the menus
” on page 22.
INPUT
Press to open the INPUT SOURCE list, press CH Sor
CH T to select a video input source, then press INPUT
again. For more information, see “Selecting the video
input source” on page 21.
In menu mode, press to confirm selections.
VOL+/VOL– Press to increase or decrease the volume.
CH /CH
Press to go to the next or previous channel in the
channel list. For more information, see “Selecting a
channel” on page 23.
(power)
Press to turn your TV on or off (standby mode). When
your TV is off, power still flows through it. To
completely disconnect power, unplug the power cord.
1
2
5
7
6
3
4
1
2
3
4
5
6
7
NS-32E320A13A_12-0417_MAN_V1_ENG.book Page 5 Sunday, May 27, 2012 1:03 PM
To Next Page
Loading...
Need help?
General