Insignia NS-39D40SNA14 User Manual

7
Insignia 39" LED TV
www.insigniaproducts.com
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
2 If the stand is attached, remove the four screws that secure the stand column to the TV, then remove the stand
column.
3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions
that came with the wall-mount bracket for information about how to correctly hang your TV.
Warning
This TV is intended to be supported by a UL Listed wall mount bracket with
suitable weight/load. (See “Miscellaneous” on page 72.)
Notes
• The length of the wall-mount screws vary depending on the wall-mount
bracket you purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take type M6 screws.
M4 12 mm screws
7.87 in. (200 mm)
7.87 in. (200 mm)
Wall-mount
brackets

Insignia NS-39D40SNA14 Specifications

General

Brand	Insignia
Model	NS-39D40SNA14
Category	TV
Language	English