Insignia NS-43D420NA18 User Manual

22
NS-32D220NA18/NS-32D220MX18/NS-43D420NA18
www.insigniaproducts.com
Connecting a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see What connection should I use? on page 17.
You can connect a DVD or Blu-ray player using:
•HDMI (best)
•AV (good)
HDMI (best)
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on
the DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
 or  to highlight HDMI1, HDMI2, or HDMI3, then press ENTER.
Note
• The 32" model does not have an HDMI3 option.
• An HDMI cable carries both audio and video. You do not need to use any
audio cables.
43":
Side of TV
HDMI cable
DVD or Blu-ray
player
HDMI cable
connector
HDMI jack
On your TV
32":
Side of TV
HDMI cable

Insignia NS-43D420NA18 Specifications

General

Brand	Insignia
Model	NS-43D420NA18
Category	LED TV
Language	English