35
32" 720p/43" 1080p 60Hz LED TV
www.insigniaproducts.com
Turning on your TV for the
first time
The first time you turn on your TV, the Easy Setup
wizard opens. The wizard guides you through setting
up basic settings including the menu language, time
setting, picture mode, TV signal source, and the
channel list.
1 Make sure that you have:
• Installed the remote control batteries. (See
page 33.)
• Connected an antenna, cable TV, or satellite TV.
(See page 18 through page 21.)
• Connected the power cord. (See page 32.)
2 Press (power) to turn on your TV. The Easy Setup
wizard opens.
3 Press
or to highlight a language, then press
ENTER.
4 Press
or to select Ye s (to turn on the Voice
Guide) or No (to turn off the Voice Guide), then
press ENTER.
5 Press
or to highlight Home Use Mode or
Store Display Mode, then press ENTER.
If you selected Store Display Mode, a message
asks if you are sure you want this mode. Select OK
to continue using Store Display Mode, or select
Cancel to change to Home Use Mode. Store
Display Mode is not an energy savings mode.
6 Press
or to highlight an option, then press
ENTER. You can select:
• Watch TV to skip the customization options. You
can press MENU later to customize settings. Go
to Finish the wizard on page 36.
• Customize my TV to set options to maximize
your experience. Go to Customize my TV on
page 35.
Customize my TV
7 Press
or to highlight a time zone, then press
ENTER.
To Next Page
Loading...
Need help?
General