Insignia NS-46E340A13 User Manual

4
NS-46E340A13 Insignia 46" LED TV
www.insigniaproducts.com
Insignia 46" LED TV
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-46E340A13 represents
the state of the art in LED TV design and is designed
for reliable and trouble-free performance.
INlink
Enjoy the benefit of having HDMI CEC compatible
products plug and play! No setup is needed! CEC
technology lets different components discover and
communicate with each other. (See page 43
for
instructions on how to use INlink.)
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Secure the base to the stand column with the
four provided screws.
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1 Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the four screws that secure the stand
column to the TV, then remove the stand
column.
3 Secure the stand cover to the back of the TV
using the four screws you just removed.
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Screw type Screw length # of screws
M4 12 mm 4
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
“Miscellaneous
” on page 54.)
Stand column
Stand cover

Insignia NS-46E340A13 Specifications

General

Brand	Insignia
Model	NS-46E340A13
Category	LED TV
Language	English