Insignia NS-DXFL2C User Manual

6
NS-DXFL2C External TTL Flash for Canon™
www.insigniaproducts.com
Setting up your flash
Installing the batteries
\
1 Open the battery compartment cover by pressing it with your thumb,
sliding the compartment down, then lifting it open.
2 Insert four (4) AA batteries (not included). Make sure that the + and –
match what is indicated in the compartment.
Cautions
• Use only Alkaline or NiMH AA batteries.
• The batteries may become hot after firing many flashes
continuously.
Notes
• Make sure that all four batteries are the same brand and
type.
• When replacing the batteries, replace all four at one
time.
• Batteries are not included with this flash.
NS-DXFL2C_14-1135_MAN_V2_ENG.fm Page 6 Thursday, October 16, 2014 3:18 PM

Insignia NS-DXFL2C Specifications

General

Brand	Insignia
Model	NS-DXFL2C
Category	Camera Flash
Language	English