Insignia NS-RGFGSS1 User Manual

www.insigniaproducts.com
40
3 Clean the outside door stainless steel surfaces by following the instructions in Cleaning stainless steel surfaces on
page 38
.
4 Clean the glass window with glass cleaner or warm, soapy water with a thorough rinse. Do not let moisture get inside
the door assembly.
Cleaning the surface burner control knobs
1 Make sure that all surface burner knobs are in the OFF position.
2 Pull the control knobs straight off the surface burner control valve stems. Do not clean the control knobs in a
dishwasher. They are not dishwasher-safe.
3 Clean the knobs in warm, soapy water. Rinse and completely dry all surfaces (including back and stem hole).
4 Clean stainless steel surfaces with a stainless steel cleaner on a damp, soft cloth.
5 Replace the control knobs in the OFF position by pushing them straight onto the control valve stems.
WARNING: Do not use spray cleaners on the surface burner control panel. Spray entering the valve holes could contact electrical
components resulting in death, personal injury, or product damage.

Insignia NS-RGFGSS1 Specifications

General

Brand	Insignia
Model	NS-RGFGSS1
Category	Ranges
Language	English