Datasheet 109
Intel
®
Celeron
®
Processor up to 1.10 GHz
5.5 Heatsink Volumetric Keepout Zone Guidelines
When designing a system platform it is necessary to ensure sufficient space is left for a heatsink to
be installed without mechanical interference. Due to the large number of proprietary heatsink
designs, Intel cannot specify a keepout zone that covers all passive and active-fan heatsinks. It is
the system designer’s responsibility to consider their own proprietary solution when designing the
desired keepout zone in their system platform. Please refer to the Intel
®
Celeron
®
Processor
(PPGA) at 466 MHz Thermal Solutions Guidelines (Order Number 245156) for further guidance.
Note: The heatsink keepout zones found in Section 6.0, “Boxed Processor Specifications” on page 110
refer specifically to the Boxed Processor’s active-fan heatsink. This does not reflect the worst-case
dimensions that may exist with other third party passive or active-fan heatsinks. Contact your
vendor of choice for their passive or active-fan heatsink dimensions to ensure that mechanical
interference with system platform components does not occur.
To Next Page
Loading...
Need help?
General
