Intel Desktop Board D410PT Technical Product Specification
58
• LAN linked at 100 Mb/s
⎯ Load: continuous read/write benchmark on remote share
• All on board peripherals enabled (serial, audio, …)
Table 27. Maximum Load Configuration Current and Power Results
Subsystem Current Draw at 12 V Power Consumption
Minimum Load Configuration 1.591 A 19.092 W
SATA DVD-R/W 0.323 A 3.876 W
3.5-inch SATA hard disk drive 0.798 A 9.576 W
PCI cards on riser 0.118 A 1.416 W
Host-powered USB devices (other
than keyboard and mouse)
0.098 A 1.176 W
Maximum Load Configuration 2.928 A 35.136 W
2.8 Reliability
The Mean Time Between Failures (MTBF) prediction is calculated using component and
subassembly random failure rates. The calculation is based on the Bellcore Reliability
Prediction Procedure, TR-NWT-000332, Issue 4, September 1991. The MTBF
prediction is used to estimate repair rates and spare parts requirements.
The MTBF data was calculated from predicted data at 55 ºC. The Intel Desktop Board
D410PT MTBF is 277,639.729 hours.
To Next Page
Loading...
Need help?
General
