Technical Reference
43
Table 14. PCI Express Full-/Half-Mini Card Connector (continued)
39 +3.3 Vaux (mSATA) Vendor
40 GND
41 +3.3 Vaux (mSATA) Vendor
42 LED_WWAN#
43 Reserved
44 LED_WLAN#
45 Reserved (mSATA) Vendor
46 LED_WPAN#
47 Reserved (mSATA) Vendor
48 +1.5V
49 Reserved (mSATA) DA/DSS
50 GND
51 Reserved (mSATA) Presence Detection
52 +3.3V
NOTE
The mSATA signals are routed only to the PCI Express Full-Mini Card connector and
not to the Half-Mini Card connector. These signals are required to support mSATA
modules.
Table 15. Dual-Port Front Panel USB 2.0 Header
Pin Signal Name Pin Signal Name
1 +5 V DC 2 +5 V DC
3 D− 4 D−
5 D+ 6 D+
7 Ground 8 Ground
9 KEY (no pin) 10 No Connect
Table 16. SATA Connector
1 Ground
2 TXP
3 TXN
4 Ground
5 RXN
6 RXP
7 Ground
To Next Page
Loading...
Need help?
General
