Intel DG43NB - Desktop Board Classic Series Motherboard User Manual

Installing and Replacing Desktop Board Components
39
Removing the PCI Express x16 Card
Follow these instructions to remove the PCI Express x16 card from the connector:
1. Observe the precautions in "Before You Begin" on page 25.
2. Remove the screw
(Figure 17, A) that secures the card’s metal bracket to the
chassis back
panel.
3. Push the card ejector lever down using the tip of a pencil or similar tool
(Figure 17, B) in the notch. This will release the card from the connector (C).
4. P
u
ll the card straight up.
Figure 17. Removing a PCI Express x16 Card

Intel DG43NB - Desktop Board Classic Series Motherboard Specifications

General

Brand	Intel
Model	DG43NB - Desktop Board Classic Series Motherboard
Category	Motherboard
Language	English