Intel Desktop Board DP67BG Product Guide
18
USB Support
The Desktop Board supports USB 2.0 and USB 3.0. There are 14 USB 2.0 ports (eight
ports routed to back panel connectors and six ports routed to three onboard headers).
The USB 2.0 ports are high-speed, full-speed, and low-speed capable.
USB 3.0 is supported by two back panel connectors (blue). USB 3.0 ports are
backward compatible with USB 2.0 and USB 1.1 devices. The USB 3.0 ports are
SuperSpeed, high-speed, full-speed, and low-speed capable.
Serial ATA Support
Intel Desktop Board DP67BG supports two onboard 6.0 Gb/s Serial ATA (SATA)
channels and four onboard 3.0 Gb/s SATA channels. The board also provides one
3.0 Gb/s external SATA (eSATA) channel via a back panel connector.
The onboard SATA channels provided by the PCH support Intel Rapid Storage
Technology which provides the following RAID (Redundant Array of Independent
Drives) levels:
• RAID 0 - data striping
• RAID 1 - data mirroring
• RAID 0+1 (or RAID 10) - data striping and data mirroring
• RAID 5 - distributed parity
Legacy I/O
Intel Desktop Board DP67BG includes a legacy I/O controller that provides the
following I/O features:
• Consumer Infrared (CIR) support
• Low pin count (LPC) interface
• Intelligent power management, including a programmable wake up event interface
• PCI power management support
Expandability
Intel Desktop Board DP67BG provides the following expansion capability:
• One PCI Express 2.0 x16 port
• One PCI Express 2.0 x8 port (x8 electrical; x16 compatible)
• Three PCI Express 2.0 x1 ports
• Two PCI bus connectors
To Next Page
Loading...
Need help?
General
