intensity RM12F User Manual

2) Press each time to change the operating mode according to the
order shown in Figure 3.5;
Figure 3.5
0.5°C (default). Long press to change the temperature continuously.
Note:
5.3 Fan Speed Operations
Figure 3.6
1) 7 fan speeds: The default in the remote controller is the mode with 7
fan speeds, where the Fan Speed will be adjusted in turn as shown in
Figure 3.7;
Cool Dry Fan Heat
Figure 3.7
2) 3 fan speeds: Fan Speed will be adjusted in turn as shown in Figure
3.8.
Figure 3.8
Operating the Remote Controller
13
Auto Speed 1 Speed 2 Speed 3 Speed 4 Speed 5 Speed 6 Speed 7
High
Auto Low Mid High
Every time when you press the button, fan speed is changed in
the following order.(see Figure 3.6).
Note:
The fan speed set on the remote controller should match with
the air conditioner. For how to set the fan speed, see section
“Initial Settings” in this document.
Fan speeds cannot be adjusted in Dry mode.

intensity RM12F Specifications

General

Brand	intensity
Model	RM12F
Category	Remote Control
Language	English