INVT Goodrive100-PV Series User Manual

Goodrive100-PV Series Solar Pumping VFD Keypad operation procedure
19
4.3.2 How to set the password of the VFD
GD100-PV series VFDs provide password protection function to users. Set P07.00 to gain the
password and the password protection becomes valid instantly after quitting from the function
code editing state. Press PRG/ESC again to the function code editing state, “0.0.0.0.0” will be
displayed. Unless using the correct password, the operators cannot enter it.
Set P07.00 to 0 to cancel password protection function.
The password protection becomes effective instantly after retreating from the function code
editing state. Press PRG/ESC again to the function code editing state, “0.0.0.0.0” will be
displayed. Unless using the correct password, the operators cannot enter it.
The units place is blinking
PRG
ESC
PRG
ESC
PRG
ESC
PRG
ESC
DATA
ENT
DATA
ENT
DATA
ENT
All digits are blinking
The units place is
blinking
The units place is blinking
The units place is blinking
The units place is blinking
+
Note: When setting the value, you can press and to modify the value.
Figure 4-5 Sketch map of password setting
4.3.3 How to watch the VFD state through function codes
GD100-PV series VFDs provide group P17 as the state inspection group. Users can enter into
P17 directly to watch the state.
DATA
ENT
DATA
ENT
DATA
ENT
PRG
ESC
PRG
ESC
PRG
ESC
PRG
ESC
All digits are blinking
The units place is
blinking
The units place is blinking
The units place is blinking
The units place is blinking
Figure 4-6 Sketch map of state watching

INVT Goodrive100-PV Series Specifications

General

Brand	INVT
Model	Goodrive100-PV Series
Category	DC Drives
Language	English