INVT Goodrive100-PV Series User Manual

Goodrive100-PV Series Solar Pumping VFD Function parameters
37
Function
code
Name
Detailed illustration of parameters
Default
Modify
P07 Group Human-Machine Interface
P07.02
QUICK/JOG
function selection
0: No function
1: Jogging running. Press QUICK/JOG to
begin the jogging running.
2: Shift the display state by the shifting
key. Press QUICK/JOG to shift the
displayed function code from right to left.
3: Shift between forward rotations and
reverse rotations. Press QUICK/JOG to
shift the direction of the frequency
commands. This function is only valid in
the keypad commands channels.
4: Clear UP/DOWN settings. Press
QUICK/JOG to clear the set value of
UP/DOWN.
5: Coast to stop. Press QUICK/JOG to
coast to stop.
6: Shift the running commands source.
Press QUICK/JOG to shift the running
commands source.
7: Quick commissioning mode (based on
non-factory parameters)
Note: Press QUICK/JOG to shift between
forward rotation and reverse rotation, the
VFD does not record the state after
shifting during powering off. The VFD will
run according to parameter P00.13 during
next powering on.
6
◎

INVT Goodrive100-PV Series Specifications

General

Brand	INVT
Model	Goodrive100-PV Series
Category	DC Drives
Language	English