INVT Goodrive20-EU VFD Series User Manual

Goodrive20-EU series VFD Keypad operation procedure
31
The unit
is blinking
All digits are
blinking
The unit
is blinking
The unit is blinking
The unit is blinking
Note: When setting, and + can be used to shift and adjust
SHIFT
PRG
ESC
PRG
ESC
PRG
ESC
PRG
ESC
DATA
ENT
DATA
ENT
DATA
ENT
Figure 4-4 Sketch map of modifying parameters
4.3.2 How to set the password of the VFD
Goodrive20-EU series VFDs provide password protection function to users. Set P07.00 to
gain the password and the password protection becomes valid instantly after quitting from the
function code editing state. Press PRG/ESC again to the function code editing state,
"0.0.0.0.0" will be displayed. Unless using the correct password, the operators cannot enter it.
Set P07.00 to 0 to cancel password protection function.
The password protection becomes effective instantly after retreating from the function code
editing state. Press PRG/ESC again to the function code editing state, "0.0.0.0.0" will be
displayed. Unless using the correct password, the operators cannot enter it.
All digits are blinking
The unit is blinking
The unit is blinking
The unit is blinking
The unit is blinking
The unit is blinking
Note: When setting, and + can be used to shift and adjust
PRG
ESC
PRG
ESC
PRG
ESC
PRG
ESC
DATA
ENT
DATA
ENT
DATA
ENT
SHIFT
Figure 4-5 Sketch map of password setting
4.3.3 How to watch the VFD state through function codes
Goodrive20-EU series VFDs provide group P17 as the state inspection group. Users can enter
into P17 directly to watch the state.
All digits are blinking
The unit is blinking
The unit is blinking
The unit is blinking
The unit is blinking
PRG
ESC
PRG
ESC
PRG
ESC
DATA
ENT
DATA
ENT
DATA
ENT
PRG
ESC
Figure 4-6 Sketch map of state watching

INVT Goodrive20-EU VFD Series Specifications

General

Brand	INVT
Model	Goodrive20-EU VFD Series
Category	DC Drives
Language	English