Inspection and Installation
Copyright ©ITECH Electronics Co., Ltd. 6
1.3 Connecting the Power Cord
Before connecting the power cord, please ensure the power switch of the
instrument is turned OFF. Only use the power cord supplied as a standard
accessory. A summary of connection procedures is given below.
NOTE
IT6500D Series power supply can also work in 110V voltage circumstances. However, the
output power is limited. For full-power output, please use 220V±10% voltage.
The power cords supplied with this product is certified for safety. In case
the supplied lines assembly needs to be replaced, or an extension lines
must be added, be sure that it can meet the required power ratings of this
product. Any misuse voids the warranty of this product.
IT6512D~IT6527D series power supply provides the standard power cords
as below.
To Next Page
Loading...
Need help?
General
