ITech IT6522D User Manual

IEEE-488 Commands
Copyright© Itech Electronics Co., Ltd. 113
Default set
Refer to *PSC command
Example
*SRE 128
Query syntax
*SRE?
Returns
<NR1>
Related Command
*ESE *ESR? *PSC *STB?
*STB
This command can read the data from status byte register. After execute this
command, the value of bit6 in status byte register will be clean.
Bit
Position
7
6
5
4
3
2
1
0
Condition
OPER
RQS
ESB
MAV
QUES
EAV
Not used
Not Used
The Arguments description in table as follow:
 OPER: Operation status summary
 RQS: Request service
 ESB: Event status summary
 MAV: Message is enabled
 QUES: EQuery status register position.
 EAV: Error message is enabled.
Query syntax
*STB?
Arguments
None
Returns
<NR1>
Related Command
*CLS *ESE *ESR
*SAV
This command can save the current setups of power supply to specified
memory. These setups contains current setups, voltage setups, max voltage

ITech IT6522D Specifications

General

Brand	ITech
Model	IT6522D
Category	Power Supply
Language	English