IEEE-488 Commands
Copyright© Itech Electronics Co., Ltd. 114
set, min voltage set, OVP set, OVP timer, OPP set, voltage rise and fall time,
analog interface and series and parallel set.
The memory can divided into 10 groups, each contains 0~9 setups. So IT6512
can save 100 Setups in all.
Command syntax
*SAV<NRf>〉
Arguments
0~99
Example
*SAV 99
*RCL:
This command can recall the setups you saved before from the specified
memory.
Command syntax
*RCL<NRf>
Arguments
0～99
Example
*RCL 80
*TST?
This command is used to query the self-test by the instrument. 0 indicates that
self-test succeeds; other Arguments indicate self-test fails. In addition, in case
of failure, an error information will be generated to describe failure reason.
Command syntax
*TST?
Arguments
None
Returns
<NR1>
To Next Page
Loading...
Need help?
General
