TraceRelated Command(IT6500C)
Copyright© Itech Electronics Co., Ltd. 107
Command syntax
TRACe:FEED:CONTrol <CRD>
Command Arguments
NEXT|ALWays|NEVer
Query syntax
TRACe:FEED:CONTrol?
Returns
<CRD>
TRACe:FEED:SELected
This command is used to select the reading source saved in the cache. If
VOLTage is selected, the voltage reading is saved in cache; if CURRent is
selected, the current reading is saved in cache. If VOLTage and CURRent are
simultaneously selected, both voltage and current are saved in cache when
saving is executed.
Command syntax
TRACe:FEED:SELected <CRD>
Command Arguments
VOLTage|CURRent|BOTH
Example
TRAC:FEED:SEL VOLT
Query syntax
TRACe:FEED:SELected?
Returns
<CRD>
TRACe:DELay
This command is used to select cache delay time.
Command syntax
TRACe:DELay<NRf>
Command Arguments
0 to3600s|MINimum|MAXimum|Default
Unit
s
To Next Page
Loading...
Need help?
General
