To Next Page

To Previous Page

TraceRelated Command(IT6500C)

Query syntax

TRACe:DELay? [MINimum|MAXimum|DEFault]

Returns

<NR3>

TRACe:TIMer

This command is used to select cache time interval.

Command syntax

TRACe:TIMer < NRf>

Arguments

0.00002 to 3600s|MINimum|MAXimum|DEFault

Unit

Example

TRAC:TIM 0.1

Query syntax

TRACe:TIMer? [MINimum|MAXimum|DEFault]

Returns

<NR3>

TRACe:POINts:ACTual?

This command is used to select number of actual readings in the cache.

Command syntax

TRACe:POINts:ACTual?

Returns

<NR1>

TRACe:CLEar:AUTO[:STATe]

This command is used to select whether to automatically clear cache data.

When Auto Clear is enabled, when saving starts, buffer will be automatically

cleared; when it is disabled, the new reading will be saved to the buffer area

following the previous data till the buffer is full or when saving stops.

Command syntax

TRACe:CLEar:AUTO[:STATe] <bool>

ITech IT6532C Manual

Other manuals for ITech IT6532C