USER’S GUIDE 3
Quick Reference
General information
The following safety precautions should be observed before using this product and any
associated instrumentations. Although some instruments and accessories would be used
with non-hazardous voltages, there are situations where hazardous conditions may be
present.
This product is intended for use by qualied personnel who recognize shock hazards and
are familiar with the safety precautions required to avoid possible injury. Read and follow
all installation, operation, and maintenance information carefully before using the product.
Refer to this manual for complete product specications.
If the product is used in a manner not specied, the protection provided by the product may
be impaired.
Before performing any maintenance, disconnect the line cord and all test cables.
Protection from electric shock
Operators of this instrument must be protected from electric shock at all times. The
responsible body must ensure that operators are prevented access and/or insulated from
every connection point. In some cases, connections must be exposed to potential human
contact. Product operators in these circumstances must be trained to protect themselves
from the risk of electric shock. If the circuit is capable of operating at or above 1000 volts, no
conductive part of the circuit may be exposed.
Denition of users
Responsible body is the individual or group responsible for the use and maintenance of
equipment is operated within its specifications and operating limits, and for ensuring that
operators are adequately trained.
Operators use the product for its intended function. They must be trained in electrical safety
procedures and proper use of the instrument. They must be protected from electric shock
and contact with hazardous live circuits.
Service is only to be performed by qualied service personnel.
We do not accept responsibility for any direct or indirect nancial damage or loss of prot
that might occur when using the electronic load.