4 USER’S GUIDE
About your safety
The following general safety precautions must be observed during all phases of operation of
this instrument. Failure to comply with these precautions or with specic warnings elsewhere
in this manual violates safety standards of design, manufacture, and intended use of the
instrument. ITECH assumes no liability for the customer’s failure to comply with these
requirements.
Safety symbols and terms
Certication and Warranty
Certication
We certify that this product met its published specifications at time of shipment from the
factory.
Warranty
This instrument product is warranted against defects in material and workmanship for a
period of one year from date of delivery. During the warranty period we will, at its option,
either repair or replace products which prove to be defective. For warranty service, with the
exception of warranty options, this product must be returned to a service facility designated
by us. Customer shall prepay shipping charges by (and shall pay all duty and taxes) for
products returned to the supplier for warranty service. Except for products returned to
customer from another country, supplier shall pay for return of products to customer.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper or inadequate
maintenance by the Customer, Customer-supplied software or interfacing, unauthorized
modication or misuse, operation outside of the environmental specications for the product,
or improper site preparation and maintenance. Product number or serial number has been
altered deleted, removed or were unable to identify. Damage from the accident, including but
not limited to lightning, water, re, abuse or negligence.
Connect it to safety earth ground using the wire recommended in the user manual.
The symbol on an instrument indicates that the user should refer to the operating
instructions located in the manual.
High voltage danger.
To Next Page
Loading...
Need help?
General
