NOTE: Do not use this feature when the outdoor temperature is equal to or less than 32°F (0°C) as
discarded water may freeze and damage the unit.
NOTE: In the event of a malfunction, the pump operation light will blink. Turn off the unit and unplug it
from the power source. Check for the following:
• The pump filter is dirty
• The pump drain hose is kinked or blocked
• The pump drain hose connection leaks
• The pump drain hose has dropped
• The reservoir is full
Make sure to empty the reservoir once a week when using the pump draining feature.
When the pump draining feature is not being used, press the pump drain hose outlet in and take the pump
drain hose out. Take care that water in the pump hose does not drip onto the floor.
Care and Maintenance
• Turn the unit off and unplug it from the power source before cleaning.
• Do not use harsh detergents or chemicals to clean the exterior of the unit. Wipe with a clean, damp
cloth.
• Remove and wash the reservoir about every 2 weeks. Do not place in dishwasher.
• Remove and clean the air filter at least every 30 days. Use a vacuum cleaner or tap the filter lightly to
remove loose dust and dirt. Rinse the air filter under warm or cold running water. Let filter dry thoroughly
before reinserting. Do not operate the unit without the air filter.
• To clean the pump filter: Remove the reservoir. Remove the pump filter and clean with water.
Storage
• Turn the unit off and wait 1 day before emptying the reservoir.
• Clean the main unit, reservoir, and air filter and let dry completely.
• Wrap the power cord around the holder on the back of the unit.
• Cover the unit to protect it from dust and moisture.
• Store the unit in a cool, dry, well-ventilated area.
PUMP FILTER
PUMP DRAIN
PRESS THE PUMP
DRAIN HOSE
OUTLET IN
To Next Page
Loading...
Need help?
General
