Maintenance
AirX, AirModule E 9/15, Airbox E/S – 6 720 810 266 (2014/10)
12
5.9 Cleaning the condensate pan
If the user interface shows an alarm indicating that the heat pump cover
requires cleaning, the condensate pan should be cleared of dirt and
leaves, which inhibit defrosting.
▶ Screw off the protective cover.
▶ Clean the condensate pan with a cloth or soft brush.
▶ Put the protective cover back.
Fig. 8 Heat pump condensate pan
[1] Condensate pan
Warning: The thin aluminum fins of the evaporator are
sharp and delicate and can be damaged by negligence.
▶ Wear gloves to protect hands from cuts
▶ Be careful not to damage the fins
To Next Page
Loading...
Need help?
General
