Menu overview
6 720 643 409 (2010/03)
52
Shut down protection during change
over from hot water to heating
1
Heating start delay 1
Heating stop delay 1
External control
Access
level
External input 1, 2 Block compressor 0
Block additional heat
0
Block heating at tripped underfloor temperature limiter
0
Block heating
0
Room temperature
0
Block hot water production
0
Start collector circuit pump
1
Alarm at low pressure in collector circuit
1
External input circuit 2, 3... Block heating at tripped underfloor temperature limiter 1
Block heating
0
Room temperature
0
Tab. 29 External control menus
Installer
Access
level
General Anti-seizure mode Day of the week
Start time
1
1
Highest permitted flow temperature T1
1
Operating mode
1
Groundwater
Groundwater
Compressor start delay groundwater
1
1
Time for reset of access level
1
Heat pump x capacity 1
Connected I/O boards Shows which circuit boards are connected
and their program version
1
Compressor working area Hot gas stop function activated 1
Outdoor stop function activated
1
Generated energy Heating 1
Hot water
1
Operating times and
consumptions
Displays the total operating times of the
compressor and add. heat. Short term
measurements can be made.
1
Temperatures All connected temperature sensors are
displayed and can also be corrected.
1
Tab. 30 Installer menus
Timers
Access
level
Tab. 28 Timers
To Next Page
Loading...
Need help?
General
