16
Use the main menu
HMC300 – 6 720 813 192 (2014/10)
The following table shows how to adjust a time program for house heating.
Use Result
Select active time program for house heating
▶ When the initial menu is active, press the menu button to open the main menu.
▶ Press the menu dial to open the menu Heating/Cooling .
▶ Turn the menu dial to mark Time program .
▶ Press the menu dial to open the menu Time program .
The text is marked on the display Activate time program . Depending on the
installed system, you may need to select a heating circuit.
▶ Press the menu dial.
▶ Turn the menu dial to mark My time program 1 or 2 and press the menu dial.
The control unit works in automatic mode with the selected time program (when two
or more heating circuits are installed the setting only applies on the selected heating
circuit).
Table 11 Activate and select time program for house heating
Use Result
Open the menu to adjust a time program for house heating
▶ When the initial menu is active, press the menu button to open the main menu.
▶ Press the menu dial to open the menu Heating/Cooling .
▶ Turn the menu dial to mark Time program .
▶ Press the menu dial to open the menu Time program .
▶ Turn the menu dial to mark My time program 1 or 2.
Depending on the installed system, you may need to select a heating circuit.
▶ Press the menu dial.
▶ Press the menu dial again to activate the input box for weekday or group of days.
▶ Turn the menu dial to select a weekday or a group of days and press the menu dial.
Changes in this menu only apply to the selected weekday or group of days.
Change break point
▶ Open the menu to adjust a time program for house heating.
▶ Turn the menu dial to mark a break point.
▶ Press the menu dial to activate the input box for the break point.
▶ Turn the menu dial to change the break point.
The new time period is shown in grey in the time program bar chart.
▶ Press the menu dial.
The control unit works with the new settings.
Table 12 Adjust time program for house heating or individual requirements
6 720 811 136-16.1O
6 720 811 136-17.1O
6 720 811 136-18.1O
6 720 811 136-19.1O
6 720 811 136-20.1O
To Next Page
Loading...
Need help?
General