33
Get information on the system
HMC300 – 6 720 813 192 (2014/10)
Menu options: Outside temp.
This menu shows the actual measured temperature. There is
also a diagram here that shows the development of the outdoor
temperature during the actual day and previous day (from
00:00 to 24:00).
Use Result
Show information on solar heating system
▶ In the active initial menu, press the info button to open the information menu.
▶ Turn the menu dial to mark Solar .
▶ Press the menu dial to open the menu Solar .
▶ Turn the menu dial to mark the menu option Solar sensors and press the menu dial.
Actual temperature of temperature sensor with the lowest number is shown. The
number on the display indicates the position of the temperature sensor in the system,
e.g. solor panel temperature [1].
▶ Turn the menu dial to show additional temperatures.
The images in the information menu show pumps, shunt valves and valves installed in
the solar heating system. When a pump is working the symbol for the pump
rotates .
Information on solar energy production
▶ In the active initial menu, press the info button to open the information menu.
▶ Turn the menu dial to mark Solar .
▶ Press the menu dial to open the menu Solar .
▶ Turn the menu dial to mark Solar yield and press the menu dial.
Solar energy production values for the actual week are shown.
▶ Turn the menu dial to switch between showing solar energy production for last week,
solar energy production for the actual week and the total energy produced by the
solar heating system since its commissioning.
Table 35 Show information on solar heating system
6 720 811 136-38.1O
6 720 811 136-39.1O
6 720 811 136-40.1O
6 720 811 136-41.1O
To Next Page
Loading...
Need help?
General