IVT Rego 5101 User Manual

Settings
6 720 645 172 (2010/07) en
26
4.12 Settings\Sensor calibration
4.13 Function test
4.14 Quick restart
Setting Factory Range HP
Sensor calibration
Sensor calibration
E11.T1
E10.T2
E4x.T3
0.000 K
0.000 K
0.000 K
E21
E21
E2x HW
B Check the sensors and adjust the measurement value if necessary.
Tab. 43 Sensor calibration
Setting Factory Range HP
Function test
Digital outputs Do1 – Do7
Function: Auto
Off, On, Auto
E2x
Analogue outputs
Ao1 – Ao5
Function:
Manual value:
Auto
%
Manual, Auto
E2x
B Function test all inputs and outputs in conjunction with commissioning.
B Set Auto after completed test.
Otherwise an alarm occurs Output in wrong pos after function test (Æ Chapter 5.6.30,
page 34).
The control unit gives a recommended setting for each output in brackets on the fourth line of the
menu window.
Tab. 44 Function test
Setting Factory Range HP
Quick restart
Quick restart
Actual v.:
No
Display
No, Yes E2x
B Select Yes if the restart time for the compressor is to be changed from 10 minutes to 20
seconds.
The time remaining in seconds is shown.
Yes can only be selected when the restart timer is counting at 10 minutes. After changing, the
value automatically resets to No.
Tab. 45 Quick restart

IVT Rego 5101 Specifications

General

Brand	IVT
Model	Rego 5101
Category	Thermostat
Language	English