Control panel
6 720 645 172 (2010/07) en
6
3.8 Initial menu
B To see the initial menu when the menu window is
unlit, press .
B Press for 5 seconds to become logged in as a
Customer (Æ Chapter 3.11, page 9).
The Initial menu shows the pump in question (E21),
date, time and outdoor temperature.
B Press to show the current operating information.
B Press to move to the top menu level (Customer).
The Initial menu looks the same in all heat pumps
irrespective of the heat pump's designation.
3.9 Finding desired function and changing
values
The menu overview shows the main functions that are
reached using the navigation buttons and .
B Press in the Initial menu to move to the top
menu level (Customer).
B Use and to scroll between the available
menus at menu level.
Navigate between the menus
Change a value, e.g. heat curve at 0 °C
The heat curve is only accessible in E21.
B Go to:
B Press or to go to the next menu under Room
temperature.
Rego 5101 E21
2010-03-01 14:23
Outd. -2:0 °C Menu>
Info
Tab. 9 Initial menu
ok
ok
>Room temperature
Hot water
Temperatures
Language
Tab. 10 Menu level 1 (part 1)
Language
Date/Time
>Access level
Tab. 11 Menu level 1 (part 2)
Button Function
Go to the next menu level for a menu
marked with >.
Return to the previous menu level.
Scroll between the menus at the same
level.
Tab. 12 Menu navigation
>Room temperature
Hot water
Temperatures
Language
Tab. 13 Menu level 1 (part 1)
>Summer/winter op.
Heat curve
Parallel offset
Hysteresis
Tab. 14 Room temperature 1
ok
ok
ok
To Next Page
Loading...
Need help?
General