en-36
7.9 TRANSPORTING
Transport speed is for highway use only. Never select
transport speed or 2 wheel drive off road. Transport in 2
wheel drive only. Make sure that the cutting units are held
in the lifted position with the safety catches engaged.
1. Start the engine and set the throttle lever to full
speed position.
2. Release the parking brake and after ensuring
that the pedal control lever is in the transport
position, press the upper part of the foot pedal.
The machine will move in a forward direction.
3. Continue to push down on the foot until the
desired speed of the machine is reached.The
foot should always be kept firmly on the pedal
to maintain full control of the drive pedal.
7 OPERATION
To Next Page
Loading...
Need help?
General
