39
Turning on and off
a colour cycle
I With the keys or place the flashing cursor
on the sector labelled CROMODREAM and press the
key. The display will show the icons for the various
colour cycles, as in 27.
I To select a colour cycle, place the flashing cursor on the re-
spective sector. While aiming the remote control at the receiv-
er, as shown in the figure, press the key again.
I To select another colour cycle, place the flashing colour on
the respective sector and press the key. The previous cy-
cle shuts down.
Press the key again to start a new cycle.
I To turn the spotlight off ahead of time, place the flashing
cursor on the sector for the active colour cycle and press the
key.
• The colour cycles (which, as previously mentioned, run ac-
cording to a factory-set sequence that cannot be modified)
alternate the base colours of the selected cy cles and the
colours that supplement them.
Each colour cy cle lasts 3 0 minutes, after which it shuts off
automatically.
• The “Cromodream
®
” function can also be activated during
use of the other functions (except for sanitizing).
NOTE
2
2
1
1
40°C
16:30
SUN
RELAX
DREAM
ENERGY
27
To Next Page
Loading...
Need help?
General
