Jadever JCL Series User Manual

mode without saving.
Place the sample on the weighing pan.
HI indication appears, when the item on the weighing pan is
OK indication appears, when the item on the weighing pan is between upper and lower limits.
LO indication appears, when the item on the weighing pan is smaller than lower limit
Note: the item on the weighing pan should be more
7-4 Basic Counting
7-4-1
Entering a Known Unit Weight and Unit weight
1)
Under the weighing mode, use the numeric
ke ys t oge th er with ke y
“ · ‖
to
inpu
value, and then press
UWS
.
2）
Put the items on the weighing pan , the
scale starts counting.
Note: Symbol ― ‖ points at ― UW ‖ w
hen
Unit weight Calling-out
1) Press
UWS/ITEM
key.
The window displays as shown on
2)
Input the number of unit weight. Press key
PRINT/LO
to modify the value (or via numeric keys)
3) Press key
M+/SAVE
to confirm called
key
ZERO/ESC
to exit and return to weighing
7-4-2
Sample Counting and
Sample Counting
1)
Place samples onto the weighing
(or into a tared container) and input the quantity
with numeric keys, then press key
The unit weight is calculated, with
at ― ACAI ‖
.
Note:
●
The larger the sample size, the more
(II)
Place the sample on the weighing pan.
HI indication appears, when the item on the weighing pan is greater than the upper limit
OK indication appears, when the item on the weighing pan is between upper and lower limits.
LO indication appears, when the item on the weighing pan is smaller than lower limit
Note: the item on the weighing pan should be more than or equal to 20e.
Entering a Known Unit Weight and Unit weight
Memory
Under the weighing mode, use the numeric
inpu
t un it weigh t
Put the items on the weighing pan , the
hen
entered unit weight is lower than 4/5 o
f sca
The window displays as shown on
the right.
Input the number of unit weight. Press key

/MR
or
TARE/

to shift and key
to modify the value (or via numeric keys)
to confirm called
-
out weight and return to the weighing mode. Press
to exit and return to weighing
mode.
Sample Counting and
ACAL
Place samples onto the weighing
pan
(or into a tared container) and input the quantity
with numeric keys, then press key
SMPL
.
The unit weight is calculated, with
Symbol ― ‖ pointing
The larger the sample size, the more
accurate unit weight.
greater than the upper limit
OK indication appears, when the item on the weighing pan is between upper and lower limits.
LO indication appears, when the item on the weighing pan is smaller than lower limit
than or equal to 20e.
f sca
le division.
to shift and key
M-/HI
or
out weight and return to the weighing mode. Press

Jadever JCL Series Specifications

General

Brand	Jadever
Model	JCL Series
Category	Scales
Language	English