(II)
Appendix 2：Exporting data to PC in the form of EXCEL
Introduction:
Connect the scale with PC and set the parameter of external device as
―EX
CEL
‖
on the scale,
then you could export the weighing data to PC in the form of EXCEL. With this function, you
could record/accumulate/average/data statistical analysis the testing data, which we could
call it as scale-computer data management function.
Note: pls enable ―Use Serial Keys‖ function in the computer.
Hardware connection and settings
1.
Use transmitting serial wire or USB wire to connect scale and pc.
Note: pls install usb driver first, if you use usb wire.
2.
Parameter settings in scale:
"PERI" = "EXCEL" (external device)
"BAUD" = "2400"/"4800"/"9600" (baud rate)
"PRT.M"= "KEY"/"STABLE" (printing model)
"PRT.F" = "PRT.F01" (printing format)
Enable the function of “Use Serial Keys” in the computer
Set Windows XP as a example:
1.
Press
―S
ta
rt‖
->"Run", and enter
―
access.cp
l‖
->
‖OK‖.
2.
In the dialog box ‖Accessibility Options‖, enter General option, choose ―Use Serial Keys‖
and press ―Settings‖.
In the dialog box ‖Settings for SerialKeys‖ , set the corresponding Serial port and Baud
rate, which should be same as Baud rate in scale.
To Next Page
Loading...
Need help?
General
