Janus G3 User Manual

Table of Contents
Section Page
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
G3 Phone Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P.C. Board Diagram 1 (Front View) . . . . . . . . . . . . . . . . . . . . . . . .
P.C. Board Diagram 2 (Back View with Optional Relay/AUX) . . . .
P.C. Board Diagram 3 (Back View with Optional LM Module) . . . .
Programming Set-Up Methods . . . . . . . . . . . . . . . . . . . . . . . . . . .
Programming Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional Programming Instructions . . . . . . . . . . . . . . . . . . . . . . . .
List of Commands for Programming Mode . . . . . . . . . . . . . . . . . .
Auxiliary Output Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery and Power Supply Information . . . . . . . . . . . . . . . . . . . . .
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
4
5
6
7
8
8
9
10
11
11
12
14
2
If you have questions or problems, please
call Janus technical support for assistance
at 800-527-9156 or visit our website at
www.avire-global.com.
Scan the QR code using your smart phone
to connect to our Automated Programming
System. (APS-Tel: 631-864-4759)

Janus G3 Specifications

General

optional AC adapter	9-12VDC/VAC @ min. 200mA
operating current range	18mA to 55mA
phone line voltage on-hook	24VDC to 70VDC (nominally 48VDC)
phone line voltage off-hook	8 to 20VDC (nominally 14VDC)
ring sensitivity	30 - 120VAC RMS
operating temperature range	32 to 122F (0 to 50C)
storage temperature range	-4 to 158F (-20 to 70C)
relative humidity	Up to 95% (non-condensing)
frequency response	550Hz - 3400Hz +/- 3db.
operational loop impedance	600 ohms

Weight and Dimensions

size	5.5in x 3.2in x 0.75in (140mm x 81mm x 19mm)
weight	0.37lbs (0.17Kg)