To Next Page

To Previous Page

18z-1, 19c-1, 19c-1 EP

Please see operator manual for full details.

Troubleshooting/FAQs

Issue / FAQ Resolution/Answer

My machine will not start

Ensure the start up sequence has been followed (Page 14).

If machine still will not start contact dealer

I can’t activate the Hydraulics

Here are some of the possible reasons:

• When the machine hydraulics are live and you lift the left hand pod

you will need to re-select ‘2-GO’ when the pod is returned to the

down position.

• The left hand pod is in the raised position.

• There is a fault on the keypad.

• Engine isn’t switched on.

• If there is an error on the machine and an error code is displayed

on the LCD screen – which would inhibit the hydraulics.

If hydraulics still won’t activate contact dealer

Why is there an audible buzzer in

the cab when I’m lifting a large load?

(19c-1

only)

The lift overload warning system has detected a load that is near the

limits of the machine, reduce load to prevent machine overturning

Can I disable the lift overload

warning indicator when not object

handling? (19c-1 EP only)

To disable lift overload warning indicator when not object handling

press button ‘C’ on the switch panel (refer to page 9)

500hrs Greasing – Does it matter

if greased every day?

No, there is no impact on life of the pivot pins or bushes

Machine Attachments

Description

Weight

(kg)

Intended Use

Hydraulic

Requirements

Mechanical Quickhitch 13.7 Quick change of attachments None

Hydraulic Quickhitch 22 Quick change of attachments Quickhitch circuit

Bucket GP 150mm 20.2